Shift Gears on Bike || How to Shift Gears on a Bike

One of the most interesting and vital processes of riding a bike always is about to Shift Gears on Bike. This may look like a challenge to the master, but the process of shifting gears is really simple. The majority of bikes on the market are a manual shift, it means that you can change gears yourself instead of relying on the vehicle’s mechanics to do it for you and they involve a lever that is called a clutch lever. Proper gearing of your bike will not just improve the speed; it will also make your ride much comfortable for you and enhance your endurance on the longer rides. The basic understanding of bike gears that, how to shift gears on a road bike Shimano can fully change the way you ride your bike. So, you must learn the easy techniques of gear shifting and start riding with style. Then the main part of shifting bike gears properly and efficiently is to always start by finding the right gear such as you must know what bike gear to use on the flat road, while the middle gear is a great gear for everyday terrain to use on a flat road or undulating terrain.

 

How to Shift gears?

How should you shift the gears, it will depend on the type of your bike. Different bikes like mountain bikes have a lot of low gears so you can easily climb steep hills, while all the road bikes have higher gears to boost the top-end speed of the bike. More gears of a bike mean more choices for you, but also more complexity for riding. There are three main and the basic controls to operate as, bike gear shifter that includes, the throttle, the clutch, and the gear selector.

The main purpose of the throttle revs the engine of bike, a clutch of bike use to engages and disengages the complete transmission, and, the main aim of the gear selector is to select the gear of the bike. For the shifting of gear, you have to pull the clutch towards yourself through your left hand, and then you can rev the engine of the bike without moving the bike forward direction. However, you have to release the clutch while the transmission is “in gear” and you’ll move the bike to the forward direction, but you do not be in a hurry to release the clutch lever, you must continue to coordinate the throttle and the clutch until your bike is moving.

 

The pattern of the gear is commonly selected by clicking a lever with your left foot, and gears include, 6th gear if it is applicable, 5th gear, 4th gear, 3rd gear, 2nd gear, NEUTRAL, and the 1st gear. Every gear operates within a specific range of speed. That was the particular sequence of movements to complete your shift of gear. Begin to shift into the easier gears with the help of your right hand early to keep a steady cadence. You must remember that your right hand is for small changes in the terrain. If you find that your pedaling pace is slowing drastically, you will likely need to use the front derailleur that is your left hand to make the gearing much easier for you to the big climb ahead.

 

FAQs:

What gears are best to use on a bike?

Most of the bikes contain two or three front gear options, and almost 11 back gear options. The left hand shifter function is to control the front gears, and the right hand shifter function is to control the rear gears. The front gears that are located next to your right pedal considered the best gears to use on bike.

What do the specific numbers mean on the bike gears?

There are two main types of numbers in bike. Lower numbers shows the low gears, and the higher numbers shows the high gears.

Conclusion:

You will find that shifting of the bike gears 101 is much easier than it sounds. You just need to know that, where and how the clutch is disengaged, how much throttle is needed for smooth acceleration of bike, and how much effort the shifter requires to Shift gears on bike, after that, the whole process will become very easy and require less concentration of yours.

 

If you like this article, please share it with your family and friends.

Thank you for your support!